EWP115 (12V) & DIGITAL CONTROLLER (Combo Pack) - PART No: 8030
Price:
$459.00
| QTY:
Combo Pack EWP115 (12V) & Controller - Part No: 8030
The EWP115 Electric Water Pump and EWP & FAN Digital Controller - simple, do-it-yourself, easy to install combination designed to replace your existing belt-driven mechanical water pump. The Controller will vary the speed of the EWP in response to the engine temperature. If the engine temp goes 3 degrees C over the target, the Controller will run your radiator fan until the target temp is restored. Five temperature settings on the Controller for either maximum power or fuel efficiency! The Controller is designed to allow the Electric Water Pump to run on for 2 mins (or set - 5°C) after hot engine shut down thus eliminating heat soak.
| SPECIFICATIONS |
| EWP OPERATING VOLTAGE |
3V DC to 15V DC
|
| EWP MAXIMUM FLOW |
115 L/min, (1822 gal / hr) at 13V DC |
| EWP OPERATING TEMP |
-40°C to 130°C (-4°F to 284°F) |
| EWP WEIGHT |
980 grams (2.16lb) |
| EWP BURST PRESSURE |
500 kPa (70 psi) |
| EWP FITS HOSE SIZES |
32mm to 51mm (1 ¼" to 2") |
| DIG CONT INPUT VOLTAGE |
12V DC to 13.5V DC |
| DIG CONT OPERATING VOLTAGE |
5V to 13.5V |
| DIG CONT MAX CURRENT |
12A |
| DIG CONT OPERATING TEMP |
-20°C to 60°C (5°F to 140°F) |
| DIG CONT SETTING TEMP |
75°, 80°, 85°, 90°, 95° |
| DIG CONT WEIGHT |
90 grams (3.2oz) |
| COMPONENTS |
| P/No. |
DESCRIPTION |
| 8125 |
EWP115 Pump |
| 8120 |
Digital Controller |
| 8512 |
Hose Clamps x 4 |
| 8510 |
Rubber Sleeves 3mm x 4 |
| 8411 |
Wiring Harness (with 10A fuse) x 1 |
| 8414 |
Thermal Sensor x 1 |
| 0410 |
In-Line Adaptor x 1 |
| 8526 |
Assorted Hardware Bag |
| 8924 |
Instruction sheets |
|
|
|
|