YOUR DEFAULT CURRENCY IS

EWP115 NYLON / LCD CONTROLLER COMBO (24 Volt) - Part No: 8831

The EWP®115 (24 Volt) and LCD EWP® & Fan Digital Controller Combo – simple, do-it-yourself, easy to install, designed to complement or replace your existing belt-driven, mechanical water pump and engine thermostat. The EWP®115 will fit most vehicle makes and models fitted and excel on large six-cylinder, V8 engines. The LCD EWP® & Fan Digital Controller is scientifically calibrated to manage the flow rate of engine coolant to lock onto a targeted engine temperature.

 

 

Kit Contents

EWP COMPONENTS

 HARDWARE BAG COMPONENTS

Description 

Qty 

Description

Qty

EWP115 Nylon Short Kit

1

Scotch Lock

1

EWP & FAN LCD Controller

1

Ring Terminal

1

Inline Adaptor

1

Ring Terminal (Yellow)

1

Wiring Harness (10A Fuse)

1

Self Tap Screws

1

Thin Rubber Sleeves

4

Temp Sensor Assembly

1

Hose Clamps

4

 Mount Pad Hook & Loop 1

EWP Hardware Bag

1

   

  

Technical Specifications
Technical Specifications - EWP115      Technical Specification - LCD Controller
Operating voltage 10V DC to 27V DC Voltage range 12V DC to 29V DC
Maximum current 5.5A @ 24V Display LCD size 70mm (2.76”) x 60mm (2.36”)
Flow rate (max) 115 L/min (30.38 US gal/min) @ 24V DC Maximum current 12Amps
Operating temp. -40° to 130°C (-40° to 266°F) Warning alarm High & low Temp., Above set temp., Sensor short circuit, Pump error, High & low voltage and Sensor open circuit
Pump design

Clockwise centrifugal with volute chamber

Targeted (set) temperatures Singular degrees from:
60°C (140°F) to 100°C (212°F)
Pump weight 920 grams (2.3 lb) Memory Set & targeted temperature
Pump material Nylon 66, 30% glass-filled Fan cut-in temp. 3°C (5.4°F) above the targeted (set) temperature
Burst pressure 500 kPa (72.5 psi) Controller type PCB with micro-processor
Seal Ceramic face seal Sensor type Thermister in housing
Fits hose sizes 35mm to 51mm (1.38” to 2”) Overrun/ shutdown -10°C (14°F) below set/target temperature or 3 minutes
    Indicators Temperature, power, EWP, test, fan, high & low temp, voltage, above set temperature (with alarm)
    Weight 100 grams (3.5 oz)
    Dimensions

Length = 95mm (3.7")

Width = 130mm (5.1")

Depth = 25mm (1”)

   

Mechanical belt-driven water pumps run directly off the motor and sap engine power … the EWP®115 is hardwired into your electrical system, by-passing the engine and releasing up to an additional 10kw (13hp). Combined with the LCD EWP®/Fan Digital Controller, the pump continues to run after you’ve switched off, eliminating “heat soak” and extending engine life.


Davies, Craig’s revolutionary, Australian-designed EWP® pumps are made from anti-corrosive, lightweight nylon reinforced with fibreglass. Universal fit allows for easy mounting into the bottom radiator hose. Our kits come with easy-to-understand DIY instructions and everything you need for easy installation, including different adaptors to fit various hose sizes and all necessary electrical wiring.


The EWP®115 and LCD EWP®/Fan Digital Controller Combo Pack is the most economical way to increase horsepower and save on fuel consumption whilst caring for your engine.


The Davies, Craig EWP® header adaptor kit can replace the mechanical water pump completely. (See EWP Header Adaptors on website)


The world’s most advanced total engine cooling management

null universal fit

null more power

null more cooling

null increase fuel efficiency

null extend engine life

null world-leading technology

null lightweight Nylon   
  

LCD EWP & FAN DIGITAL CONTROLLER - 12 & 24 VOLT
This LCD EWP® / Fan Digital Controller (Part #8000) is Australian designed and as part of this Australian manufacturing company’s continuous improvement program this advanced Digital Controller boasts a suite of enhancements.

  

The updated LCD Digital Controller how has two specific functions. This unique Controller will now manage the operation of the EWP® by varying the speed of the EWP® in response to the temperature of the engine and manage control of your electric engine fan. The Controller has a push-button on the facia panel that offers target temperatures Singular degrees from 60°C (140°F) to 100°C (212°F).

Generally, higher engine temperature will offer improved fuel efficiency and lower engine temperature more power. The LCD Digital Controller will now operate the engine’s electric fan automatically once the engine has reached +3c above the target temperature. A significant benefit too is the Controller allows the EWP® to run on after ignition shutdown to reduce heat soak. It is recommended that engine operational temperatures be checked with manufacturer.

Features
null  Black & White Numerical Screen

null Celsius or Fahrenheit display option
null Warning Alarms: 

- Plus 10°C (14°F) set/target temperature
- Under temp 40°C after 5 mins
- Temp sensor error
- Over or under voltage
- EWP error

 null  Select any set temp range from 60°C (140°F)to 100°C (212°F)
null Set / targeted temperature memory
null Override feature to assist bleeding EWP & fail safe
null Input voltage display
null Compatible with billeted style Electric Water Pumps

 

User Reviews

  • Be the first to review this product.

Please Login to add your review.