YOUR DEFAULT CURRENCY IS

EWP80 / LCD Controller Combo - Part No: 8807

The EWP®80 Electric Water Pump and LCD EWP®/Fan Digital Controller Combo – simple, do-it-yourself, easy to install, designed to complement or replace your existing belt-driven, mechanical water pump and engine thermostat, and operate your Thermatic® Fan.

The EWP®80 will fit most vehicle makes and models fitted with naturally-aspirated or turbo engines up to two litres, 12 Volt Only.

 

Visit the DC Tube page for installation demonstration videos: http://daviescraig.com.au/dc-tube

 

Kit Contents

EWP COMPONENTS

 HARDWARE BAG COMPONENTS

Description 

Qty 

Description

Qty

EWP Short Kit

1

Scotch Lock

1

EWP & FAN Controller

1

Ring Terminal

1

Inline Adaptor

1

Ring Terminal (Yellow)

1

Wiring Harness (10A Fuse)

1

Self Tap Screws

1

Elbow Adaptor 35mm (Nylon)

1

Temp Sensor Assembly

1

Straight Adaptor 35mm (Nylon)

1

Adaptor M5 Bolt

6

O-Ring

2

Adaptor M5 Nut

6

Thin Rubber Sleeves 3mm

2

M5 Cap Screw Long

6

Hose Clamps

4

 

 

EWP Hardware Bag

1

 

 

 

Technical Specifications
Technical Specifications - EWP80      Technical Specification - LCD Controller
Operating voltage 3V DC to 15V DC Voltage range 12V DC to 29V DC
Maximum current 7.5A @ 13V Display LCD size 70mm (2.76”) x 60mm (2.36”)
Flow rate (max) 80 L/min (21.13 US gal/min) @ 13V DC Maximum current 12Amps
Operating temp. -40° to 130°C (-40° to 266°F) Warning alarm High & low Temp., Above set temp., Sensor short circuit, Pump error, High & low voltage and Sensor open circuit
Pump design

Clockwise centrifugal with volute chamber

Targeted (set) temperatures Singular degrees from:
60°C (140°F) to 100°C (212°F)
Pump weight 900 grams (2.0 lb) Memory Set & targeted temperature
Pump material Nylon 66, 30% glass-filled Fan cut-in temp. 3°C (5.4°F) above the targeted (set) temperature
Burst pressure 350 kPa (50 psi) Controller type PCB with micro-processor
Seal Ceramic face seal Sensor type Thermister in housing
Fits hose sizes 32mm to 51mm (1⅜” to 2”) Overrun/ shutdown -10°C (14°F) below set/target temperature or 3 minutes
    Indicators Temperature, power, EWP, test, fan, high & low temp, voltage, above set temperature (with alarm)
    Weight 100 grams (3.5 oz)
    Dimensions

Length = 95mm (3.7")

Width = 130mm (5.1")

Depth = 25mm (1”)

   

The revolutionary, Australian-designed EWP®80 is made from anti-corrosive, lightweight, heat-resistant, glass-filled nylon and incorporates a ceramic faced seal for long-life durability.
The EWP®80 greatly enhances engine cooling control while giving you added power and improved fuel economy. By removing the parasitic power losses of a belt-driven, mechanical water pump the EWP® can provide up to 10kW (13hp) of extra power and increased torque.


The LCD EWP®/Fan Digital Controller will manage both the EWP® and Thermatic® fan operation. The Digital Controller will vary the speed of the EWP® in response to the engine’s coolant temperature. Multiple temperature settings are provided on the Controller for either maximum power or fuel efficiency.

The Thermatic® Fan/s will be activated automatically once the engine coolant rises 3°C (5.4°F) above the targeted (set) temperature. The Digital Controller will automatically run on for three minutes (or to 10°C / 14°F below the set temperature) after engine shut down, eliminating ‘heat soak’ and extending engine life.


The EWP®80 Digital Controller Combo is supplied in a do-it-yourself kit with everything you need for fitment to your vehicle’s engine, including an easy-to-follow DIY instruction booklet.

The world’s most advanced total engine cooling management system

  • universal fit
  • more power
  • more cooling
  • increase fuel efficiency
  • extend engine life
  • world-leading technology
  • lightweight Nylon 

User Reviews

  • Be the first to review this product.

Please Login to add your review.