The Davies Craig Universal Fan Mounting Kit includes all parts necessary for mounting & wiring 12volt Fans for both Davies Craig and other Electric Fan models. For 24V fans, please look at part number 1001.
Fan Sizes: 8", 9", 10", 12", 14", 16"
|0588||FUSE WEDGE 15 AMP||1|
|0590||FUSE WEDGE 30 AMP||1|
|0513||SCOTCH LOCK 3M 564||1|
|0529||NUT NYLOC 3/16||4|
|0533||RELAY - 12V 40 AMP 5 PIN WITH RESISTOR PROTECTION||1|
|0504||BOLT HEX W/F 3x3/16||4|
|0556||WASHER - FIBRE RED||4|
|0559||WASHER MUDGUARD SILVER||4|
|0512A||CONNECTOR (YELLOW) Y3C||2|
|0574||RING TERM. (YELLOW) Y3-6||1|
|0613||SCREW - SELF TAP 8X3/8 BZ||1|
|10956||Universal Fan Hardware Kit 12V / 24V Instructions||1|
The Davies Craig Universal Fan Mounting Kit includes all parts necessary for mounting & wiring a 12 Volt Electric Fan from sizes 8" up to 16" inch. For 24 Volt Fans please look at part number 1001.
This kit will work with all Davies Craig fans and others.
Please pay particular attention to the markings on the fan hub/blade regarding the direction the fan should operate. The Thermatic Fan fitting instructions must be closely followed, regardless of whether the unit is mounted upstream or downstream.
Please note the direction of the arrow on the hub/blade. Once the fan is installed the arrow may not be visible.
Position the fan assembly directly on the face of the radiator/condenser. For upstream operation, take care the fan assembly does not foul any struts, bonnet latches etc. For downstream operation take care fan assembly does not foul pulleys, belts etc.
Depending on the space available and the presence of an AC condenser, you may prefer to remove the radiator to ease the fitting procedure.
Separate the radiator fins at the four points where the mounting bolts are to be positioned. Use a ‘’Phillips head’’ screw-driver or very blunt instrument to separate the fins, being careful not to damage the tubes
Secure fan to the radiator using the hardware provided. Ensure the long bolts, fibre and metal washers along with nuts provided are placed in the correct sequence, as per the diagram above.
Please fit the appropriate fuse as per chart below;
|Fan Size||Voltage||Recommended Fuse (Amps)|
|8 “ 9” 10” 12” 14”||12V||15A|
|14”HP & 16”||12V||30A|
|8 “ 9” 10” 12” 14”||24V||7.5A|
|14”HP & 16"||24V||15A|
If you wish to thematically control the electric fan(s) you should purchase a Davies, Craig Thermatic Switch Kit, Part: #0401, #0400 Combo Kit or a Twin Fan Thermatic Controller Part, #0444 from your retailer. If you wish to cool both the radiator and AC condenser you should purchase Part #0444, or a Thermatic Switch & Relay Kit, Part #0404 - which contains the Thermatic Switch with an extra relay and wiring loom.