YOUR DEFAULT CURRENCY IS

Universal Fan Hardware Kit 24V - Part No: 1001

The Davies Craig Universal Fan Mounting Kit includes all parts necessary for mounting & wiring 24volt Fans for both Davies Craig and other Electric Fan models. For 12V fans, please look at part number 1000.
 

Fan Sizes: 8", 9", 10", 12", 14", 16"

KIT COMPONENTS

Part No.  Description  Units 
0586 FUSE WEDGE 7.5 AMP  
0588 FUSE WEDGE 15AMP  
0513  SCOTCH LOCK 3M 564   1
0529  NUT NYLOC 3/16  
0534   RELAY - 24V 40 AMP 5 PIN WITH RESISTOR PROTECTION  
0504  BOLT HEX W/F 3x3/16 
0556 WASHER - FIBRE RED 4
0559 WASHER MUDGUARD SILVER 4
0512 CONNECTOR (BLUE) 2072 2
0532 HARNESS 24VOLT 1
0550 RING TERMINAL 1
0613 SCREW - SELF TAP 8X3/8 BZ 1
10956 Universal Fan Hardware Kit 12V / 24V Instructions 1

 
 
The Davies Craig Universal Fan Mounting Kit includes all parts necessary for mounting & wiring a 24 Volt Electric Fan from sizes 8" up to 16" inch.  For 12 Volt Fans please look at part number 1000. 
This kit will work with all Davies Craig fans and others.
 
Please pay particular attention to the markings on the fan hub/blade regarding the direction the fan should operate. The Thermatic Fan fitting instructions must be closely followed, regardless of whether the unit is mounted upstream or downstream.
Please note the direction of the arrow on the hub/blade. Once the fan is installed the arrow may not be visible. 
  
Position the fan assembly directly on the face of the radiator/condenser. For upstream operation, take care the fan assembly does not foul any struts, bonnet latches etc. For downstream operation take care fan assembly does not foul pulleys, belts etc.
Depending on the space available and the presence of an AC condenser, you may prefer to remove the radiator to ease the fitting procedure. 
 

  
Separate the radiator fins at the four points where the mounting bolts are to be positioned. Use a ‘’Phillips head’’ screw-driver or very blunt instrument to separate the fins, being careful not to damage the tubes
Secure fan to the radiator using the hardware provided. Ensure the long bolts, fibre and metal washers along with nuts provided are placed in the correct sequence, as per the diagram above.
Please fit the appropriate fuse as per chart below; 
 

Fan Size  Voltage  Recommended Fuse (Amps) 
8 “ 9” 10” 12” 14”   12V  15A
14”HP & 16”  12V 30A 
8 “ 9” 10” 12” 14”  24V  7.5A 
14”HP & 16"  24V  15A 

 
If you wish to thematically control the electric fan(s) you should purchase a Davies, Craig Thermatic Switch Kit, Part: #0401, #0400 Combo Kit or a Twin Fan Thermatic Controller Part, #0444 from your retailer. If you wish to cool both the radiator and AC condenser you should purchase Part #0444, or a Thermatic Switch & Relay Kit, Part #0404 - which contains the Thermatic Switch with an extra relay and wiring loom.
 

User Reviews

  • Be the first to review this product.

Please Login to add your review.