YOUR DEFAULT CURRENCY IS

11" Brushless Thermatic® Fan + #0444 Fan Switch (12 VOLT) (PART #0023) 

This is a June 2019 Promo offering the Digital Fan Switch (Part #0444) at half price with the purchase of a Fan
 
KIT CONTENTS
DESCRIPTION UNITS
11" Brushless Electric / Thermatic Fan (12 Volt) (Part #0120) 1
Digital Thermatic® Fan Switch Kit (12 & 24V) (PART #0444) 1

 

************************************************************

11" BRUSHLESS THERMATIC® ELECTRIC FAN (12V) (PART #0120)

The 11” one-directional ‘pusher’ Brushless Thermatic Fan is a tidy compact nylon composite shroud and blade with a long-life brushless motor (10,000 hours). This style of brushless Thermatic Fan suits air conditioning/condenser applications in 12 Volt Applications only.

Davies, Craig’s Thermatic Fans offer the same high performance air flow feature that has been offered by Davies, Craig electric fans to the automotive industry for the past forty five years. This low-profile, high performance brushless 11” Thermatic Fan supplies constant powerful, high air flow which increases cooling/ heat exchange efficiency.  

 

Components

Part Number Description
0120 11" Brushless Thermatic Fan (12 volt)

 

Davies, Craig Thermatic Fans can be used as either a primary or secondary source of engine and air-conditioning cooling;

  • Economical replacement for failed Original Equipment (OE) electric fan.
  • 5-10% increase in engine power and fuel saving when replacing the original fan clutch and/or mechanical belt-driven fan assemblies
  • Operated in conjunction with our Electric Water Pump (EWP) & LCD EWP/Fan Digital Controller
  • Compatibility with all Davies Craig thermal controlled electric switches
  • Constant air flow regardless of vehicle engine speed
  • Wide variety of applications

************************************************************

DIGITAL THERMATIC® FAN SWITCH KIT (Part #0444)

Our very own designed Digital Thermatic Fan Switch Kit can be used with our Thermatic Fans, EWP's and competitors Fans.

It senses air temperature as it passes through the radiator with the sensor placed in the radiator fin section or the sensor can also be placed directly into the coolant system in combination with a Temperature Sensor Adaptor Kit (Part 0409).

It can be used for 12 or 24 volt applications and has an adjustable temperature range of 40ºC to 110ºC (104ºF to 230ºF) which can show Centigrade or Fahrenheit. Temp is set by pressing the set button. It can run 1 or 2 fans. The second fan (if applicable) will start 10 seconds after Fan #1 runs. It operated thermally & also when the air conditioning is in operation. 
 

KIT CONTENTS

DESCRIPTION

UNITS

DIGITAL FAN CONTROLLER 

MOUNT KIT 

SCOTCH LOCK 

 RING TERMINAL (YELLOW)

1

SELF TAP SCREW 

2

CONNECTOR (YELLOW)

1

  

 *Note: The unit is Not WaterProof

 

 24 Volt Application 

Kit sold in 12 volt configuration, for 24 volt application, you will need to purchase 2 x 24 volt relays. 

Simply search for part 10534 in our search bar (top right-hand side of website).

 

AIR TEMPRETURE APPLICATION:

It senses air temperature as it passes through the radiator and has an adjustable temperature range of 40ºC to 110ºC (104ºF to 230ºF).
The Temperature Sensor is placed in the radiator fin section as close to the hot coolant inlet as possible, no need to cut hoses or can be placed directly into the coolant system.

WATER / COOLANT APPLICATION:
The 0444 sensor can now also be placed directly into the coolant system. To help you identify if your 0444 is capable of water / coolant applications, the sensor cable will be 1meter in length whilst the older 0444 units only have a 50cm cable. 

You will also need to use a Temperature Sensor Adaptor Kit (Part 0409) to assist with this type of fitment.

**NOTE: ensure you have a current 0409 which inlcudes a 5 & 6mm Olive. A Star Burst on the packaging will you identify this along with two olives in the packaging. You can also contact us directly to attain a 5mm olive should you have older stock (Part 10408).

 
SPECIFICATION

  • Max voltage: 12 to 27V (For 24V, relays need to be changed, not supplied in kit)
  • Max currentRated to 30 amps per Fan (Maximum 40amp per Fan) Unit comes with 2 x 30 amp fuses and 2 x 40 amp relays
  • Relay setup: Dual relay
  • Speed: Single speed, 10 second delay to start up the second fan
  • Applications: Suitable for single and dual fan applications
  • Screen Display: LED digital temp display, actual temp + set temp
  • Temp Display: Centigrade or Fahrenheit
  • Temp settings: 40°c to 110°c  (104°F to 230°F)
  • Temp setting: Push Button
  • Circuit type: Pre-programmed micro controller
  • Output wires: Batt + Batt - IGN, AC Clutch, Fan #1, Fan #2 Thermistor Probe
  • Dimensions: 95x65x56 mm

*Note: if using this switch for use with our EWP's, it will not vary the speed of the pump in response to engine temperature but rather turn the pump on and off at your set temperature. For EWP control, we would recommend part number 8001 which can manage both the EWP and your Thermatic Fans.   

 

**********************************************

UNIVERSAL FAN FITTING KIT (sold separately]

hyperlink Image.jpg SINGLE FAN MOUNTING HARDWARE KIT (12V) (1000)

hyperlink Image.jpg SINGLE FAN MOUNTING HARDWARE KIT (24V) (1001)

hyperlink Image.jpg DUAL FAN MOUNTING KIT - UNIVERSAL 12V (1002)

hyperlink Image.jpg DUAL FAN MOUNTING KIT - UNIVERSAL 24V (1003)

hyperlink Image.jpg FAN & TRANS OIL COOLER MOUNTING HARDWARE (UNIVERSAL) (0578)

The Davies, Craig Universal Fan Fitting Kit includes all parts necessary for mounting and wiring any 12- and 24-volt electric fans
– all Davies, Craig Thermatic® Fans and other electric fan models.

1000 - Kit (Small).jpg

 

 Optional Parts

Application Part Number Description
Switches / Controllers 0444 Digital Thermatic Fan Switch (12V & 24V)
0401 Mechanical Thermal Switch (12V & 24V)
8000 LCD EWP & Fan Controller(12V & 24V)

 

Specification

Voltage:

12V

Rated Current:

11A

Category:

Brushless Motor

Maximum Air Flow:

1050 CFM

Rotation:

Clockwise

Rated RPM:

2600 +/- 100 RPM

Maximum Noise:

80dB

Air flow direction:

Pusher / Upstream 

Weight:

2.27 kg

Rated Power:

140W

Material:

66 Nylon Glass

 11inch Brushless Fan - Drawing Specs (Front).jpg11inch Brushless Fan - Drawing Specs (Side).jpg

User Reviews

  • Be the first to review this product.

Please Login to add your review.