YOUR DEFAULT CURRENCY IS

14" Hi-Power Thermatic® Fan + #0444 Fan Switch (12 VOLT) (PART #0027) 

This is a June 2019 Promo offering the Digital Fan Switch (Part #0444) at half price with the purchase of a Fan
 
KIT CONTENTS
DESCRIPTION UNITS
14" Hi-Power Electric / Thermatic Fan (12 Volt) (Part #0107) 1
Digital Thermatic® Fan Switch Kit (12 & 24V) (PART #0444) 1

 

*************************************************************************************

14" HI-POWER THERMATIC® Electric FAN (12V) (PART #0107)

All Davies Craig Thermatic® Fan are packaged with fan assembly (motor, fan blade, shroud and mounting feet).

A Davies Craig Thermatic® Fan is suitable for both condenser and radiator cooling. Thermatic® Fans provide; Constant air flow, increased fuel economy, air conditioning performance, cooler engine running, low profile, high performance, increased engine power and fully reversible blades and polarity for bi-directional air flow.

These fan assemblies are set up for upstream applications.

For downstream applications the fan blade must be removed and turned over and the polarity reversed. Always check that the fan blade rotates in the direction shown by the arrows on the blade before making a permanent wiring connection and prior to fastening the unit to the radiator.

SPECIFICATIONS   COMPONENTS
Airflow 1500 CFM (ft3/min)   #0220 Motor (12 Volt)
Maximum current

13.0A (12 Volt)

6.5A (24 Volt)

  #0327 Rotor (reversible, glass-filled nylon)
Weight 2.5 kg (3.5 lb)   #0371 Shroud (glass-filled polypropylene)
Dimensions

Height = 350mm

Depth = 94mm

  #0604 Mounting feet

 

*************************************************************************************

DIGITAL THERMATIC® FAN SWITCH KIT (Part #0444)

Our very own designed Digital Thermatic Fan Switch Kit can be used with our Thermatic Fans, EWP's and competitors Fans.

It senses air temperature as it passes through the radiator with the sensor placed in the radiator fin section or the sensor can also be placed directly into the coolant system in combination with a Temperature Sensor Adaptor Kit (Part 0409).

It can be used for 12 or 24 volt applications and has an adjustable temperature range of 40ºC to 110ºC (104ºF to 230ºF) which can show Centigrade or Fahrenheit. Temp is set by pressing the set button. It can run 1 or 2 fans. The second fan (if applicable) will start 10 seconds after Fan #1 runs. It operated thermally & also when the air conditioning is in operation. 
 

KIT CONTENTS

DESCRIPTION

UNITS

DIGITAL FAN CONTROLLER 

MOUNT KIT 

SCOTCH LOCK 

 RING TERMINAL (YELLOW)

1

SELF TAP SCREW 

2

CONNECTOR (YELLOW)

1

  

 *Note: The unit is Not WaterProof

 

 24 Volt Application 

Kit sold in 12 volt configuration, for 24 volt application, you will need to purchase 2 x 24 volt relays. 

Simply search for part 10534 in our search bar (top right-hand side of website).

 

AIR TEMPRETURE APPLICATION:

It senses air temperature as it passes through the radiator and has an adjustable temperature range of 40ºC to 110ºC (104ºF to 230ºF).
The Temperature Sensor is placed in the radiator fin section as close to the hot coolant inlet as possible, no need to cut hoses or can be placed directly into the coolant system.

WATER / COOLANT APPLICATION:
The 0444 sensor can now also be placed directly into the coolant system. To help you identify if your 0444 is capable of water / coolant applications, the sensor cable will be 1meter in length whilst the older 0444 units only have a 50cm cable. 

You will also need to use a Temperature Sensor Adaptor Kit (Part 0409) to assist with this type of fitment.

**NOTE: ensure you have a current 0409 which inlcudes a 5 & 6mm Olive. A Star Burst on the packaging will you identify this along with two olives in the packaging. You can also contact us directly to attain a 5mm olive should you have older stock (Part 10408).

 
SPECIFICATION

  • Max voltage: 12 to 27V (For 24V, relays need to be changed, not supplied in kit)
  • Max currentRated to 30 amps per Fan (Maximum 40amp per Fan) Unit comes with 2 x 30 amp fuses and 2 x 40 amp relays
  • Relay setup: Dual relay
  • Speed: Single speed, 10 second delay to start up the second fan
  • Applications: Suitable for single and dual fan applications
  • Screen Display: LED digital temp display, actual temp + set temp
  • Temp Display: Centigrade or Fahrenheit
  • Temp settings: 40°c to 110°c  (104°F to 230°F)
  • Temp setting: Push Button
  • Circuit type: Pre-programmed micro controller
  • Output wires: Batt + Batt - IGN, AC Clutch, Fan #1, Fan #2 Thermistor Probe
  • Dimensions: 95x65x56 mm

*Note: if using this switch for use with our EWP's, it will not vary the speed of the pump in response to engine temperature but rather turn the pump on and off at your set temperature. For EWP control, we would recommend part number 8001 which can manage both the EWP and your Thermatic Fans.   

 

*************************************************************************************

UNIVERSAL FAN FITTING KIT (sold separately]

hyperlink Image.jpg SINGLE FAN MOUNTING HARDWARE KIT (12V) (1000)

hyperlink Image.jpg SINGLE FAN MOUNTING HARDWARE KIT (24V) (1001)

hyperlink Image.jpg DUAL FAN MOUNTING KIT - UNIVERSAL 12V (1002)

hyperlink Image.jpg DUAL FAN MOUNTING KIT - UNIVERSAL 24V (1003)

hyperlink Image.jpg FAN & TRANS OIL COOLER MOUNTING HARDWARE (UNIVERSAL) (0578)

The Davies, Craig Universal Fan Fitting Kit includes all parts necessary for mounting and wiring any 12- and 24-volt electric fans
– all Davies, Craig Thermatic® Fans and other electric fan models.

1000 - Kit (Small).jpg

 

 What size Thermatic® Fan do I need?
If your car make is not listed in our Model Selection Guide (see the Davies, Craig website, www.daviescraig.com.au/catalogues) we suggest the following:

  1. Measure your radiator core dimensions (width, depth and clearance - refer diagram below) and refer to “Fan Models” to check which fan/s will fit your core.
  2. Davies Craig Thermatic® Fans are reversible (Ex: Brushless models) which means they can be mounted upstream or downstream, as illustrated below.
  3. In general, one large fan will have better airflow than two smaller fans. Where radiator is rectangular there may be no choice but to fit two smaller fans; choose the largest that can be accommodated in space available. The fan can also be mounted offset from centre to clear engine components when mounted in the downstream position.
    Note: Fans should not be fitted on opposite sides of radiator core unless these are offset such that the airflow of one is not interfering with the airflow of the other.
  4. If you require advice, please contact Davies, Craig for assistance.

 

Fan Mounting Direction

2011_DCPL_Catalogue-15 - Fan Mounting Options.jpg

 

User Reviews

  • Be the first to review this product.

Please Login to add your review.