The EWP130 Alloy 12V is available for purchase in following options:
Turbocharge your engine cooling with the Davies, Craig EWP®130 alloy Electric Water Pump. Like all the EWPs®, this unit is designed for universal engine fitment to satisfy those larger and higher horsepower, turbocharged, supercharged and ‘worked’ engines which develop excessive heat. The EWP®130 configuration mirrors the highly successful EWP®80 which offers a numerous selection of attachment options, including elbow and straight adaptors which can be bolted on to both the inlet and outlet for simple remote engine mounting.
This rugged alloy hi-flow electric water pump is designed to complement or replace the engine’s existing mechanical water pump. This essential performance product increases power to your vehicle’s drive wheels and improves coolant temperature
control. By removing the parasitic power losses of belt-driven water pumps, the EWP®130 releases up to 10kW (13hp) of extra power, increased torque and fuel savings. Our EWP range are also extensively used in Intercooler Applications.
EWP130 Alloy 12 Volt Pump
|5x12 Flanged Hex Set Screw Zinc Silver||12|
|Voltage||12 Volt Pump|
|Operating voltage||3V DC to 15V DC|
|Maximum current||10A @ 13V|
|Flow rate (max)||
(37.2 US gal/min) @ 13V DC
|Operating temp.||-40° to 130°C (-40° to 266°F)|
|Pump design||Clockwise centrifugal with volute chamber|
|Seal||Ceramic face seal|
No, none of our pumps are self-priming
|Fits hose sizes||
35mm to 51mm
(1⅜” to 2”)
EWP® & CONTROLLER INSTALLATION DEMONSTRATION
Combine it with the LCD EWP®/Fan Digital Controller (Sold separately Part #8002 or combo #8990) and the pump continues to run after you’ve switched off, eliminating “heat soak” and extending engine life. The EWP®130 and LCD EWP®/Fan Digital Controller Combo Kit is the most economical way to increase horsepower and save on fuel consumption whilst caring for your engine.
The Davies, Craig EWP® header adaptor kit can replace the mechanical water pump completely.
EWP® INSTALLATION OPTIONS
Installing an EWP® as an AUXILIARY PUMP
EWP® INSTALLATION – disabling Mechanical water pump
In both these cases, the EWP® will pump past the impeller of the mechanical water pump.
Disengaged mechanical water pump (recommended)
Removed mechanical water pump (Ideal)
In most cases EWP® will be adequately supported by the radiator hose. Where mounting is required, the EWP® must be soft mounted to protect against vibration. For the EWP115, EWP130 and EWP150 Part #8700 Mounting bracket is recommended.
For further information, see Product Information