EWP130 Alloy & LCD Controller Combo (24 Volt) (Part #8991)

The EWP130 Alloy 24V is available for purchase in following options:

  • Pump Only (Part #8181) 
  • Kit (Part #8081) 
  • Combo with Controller (Part #8991) 

Turbocharge your engine cooling with the Davies, Craig EWP®130 alloy Electric Water Pump, your choice of Thermatic® Fan and an LCD EWP®/Fan Digital Controller.

Like all the EWPs, this unit is designed for universal engine fitment, to satisfy those larger and higher horsepower, turbocharged, supercharged and ‘worked’ engines which develop excessive heat.

The EWP®130 alloy unit has AN-16 internal inlet and outlet threads for neat, tight, screw-in fitting applications. The EWP®130 configuration mirrors the highly successful EWP®80 which offers a numerous selection of attachment options, including elbow and straight adaptors which can be bolted on to both the inlet and outlet for simple remote engine mounting.

The EWP®130 will be supplied with one each of the new 35mm straight and elbow alloy adaptors, ‘O’ rings and mounting hardware along with two 3mm rubber adaptor sleeves. The respective 38 mm alloy adaptors and 6mm rubber adaptor sleeves are optional.

This rugged alloy hi-flow electric water pump is designed to complement or replace the engine’s existing mechanical water pump. This essential performance accessory increases power to your vehicle’s drive wheels and improves coolant temperature control.

The EWP®130 is a universal, do-it-yourself, easy installation fitment to engines up to seven litres. By removing the parasitic power losses of belt-driven water pumps, the EWP®130 releases up to 10kW (13hp) of extra power, increased torque and fuel savings.

Combine it with the LCD EWP®/Fan Digital Controller and the pump continues to run after you’ve switched off, eliminating “heat soak” and extending engine life. The EWP®130 and LCD EWP®/Fan Digital Controller Combo Kit is the most economical way to increase horsepower and save on fuel consumption whilst caring for your engine. The Davies, Craig EWP® header adaptor kit can replace the mechanical water pump completely. 





EWP130 Alloy 24 Volt Pump


EWP / FAN LCD Controller 1
Alloy elbow adaptor - 35mm (1⅜”) 1
Alloy straight adaptor - 35mm (1⅜”) 1
Hose Clamps 4
Rubber adaptor sleeve - 3mm (⅛”) 4
EWP Adaptor O-Ring 2
Wiring Harness Digital Controller 1
Inline Adaptor 5/16" 1
EWP130 Combo Hardware Bag 1
Instructions 1


Technical Specifications EWP130

Voltage 24 Volt Pump
Operating voltage 20V DC to 27V DC
Maximum current  5.5A @ 24V
Flow rate (max)

130 L/min (34.34 US gal/min) @ 24V DC

Operating temp. -40° to 130°C  (-40° to 266°F)
Pump design Clockwise centrifugal with volute chamber
Pump weight

1,226grams (2.7 lb)

Pump material

Aluminium (Powder Coated)

Burst pressure

500 kPa (72.5 psi)

Seal Ceramic face seal
Self Priming

No, none of our pumps are self-priming

Fits hose sizes

35mm to 51mm (1⅜” to 2”)


LCD EWP / FAN Controller

For optimum control of Davies, Craig 12 Volt and 24 Volt Electric Water Pumps.
Suits EWP®80, EWP®115, EWP®130, EWP®150 and Thermatic® Fans.

The LCD EWP®/Fan Digital Controller has two specific functions. This unique Digital Controller will manage the operation of the EWP® by varying the speed of the pump in response to the coolant temperature and manage control of your electric engine fan. The Controller has a push-button to lock in any one of the nine targeted/set temperatures. It’s highly recommended you set/target the Controller to closely match your engine’s existing thermostat temperature.

Generally, higher engine temperature will offer improved fuel efficiency and lower engine temperature more power. The Digital Controller will operate the engine’s electric fan automatically once the engine has reached 3°C (5.4°F) above the targeted (set) temperature. Another significant benefit is that the Controller allows the EWP® to run on after ignition shutdown to eliminate heat soak.


Technical Specifications LCD Controller

Voltage Range 12 Volt DC to 29V DC
Display LCD Size 70mm (2.76”) x 60mm (2.36”)
Maximum current 12A
Warning Alarm

 High & low Temp., Above set temp., Sensor short

circuit, Pump error, High & low voltage and Sensor open circuit
Targeted Set Temp Range Singular degrees from:
40°C (104°F)to 110°C (230°F)
Memory Set & targeted temperature
Fan Cut-in Temp 3°C (5.4°F) above the targeted (set) temperature
Controller Type

PCB with micro-processor

Sensor Type

Thermister in housing

Overrun / Shutdown

10°C (14°F) below set/target temperature or 3

Indicators Temperature, power, EWP, test, fan, high & low temp, voltage, above set temperature (with alarm)

100 grams (3.5 oz)


Length = 95mm (3.7")

Width = 130mm (5.1")

Depth = 25mm (1”)


null  Black & White Numerical Screen

null Celsius or Fahrenheit display option
null Warning Alarms: 

- Plus 10°C (14°F) set/target temperature
- Under temp 40°C after 5 mins
- Temp sensor error
- Over or under voltage
- EWP error

 null  Select any set temp range from 40°C (104°F)to 110°C (230°F)
null Set / targeted temperature memory
null Override feature to assist bleeding EWP & fail safe
null Input voltage display
null Compatible with billeted style Electric Water Pumps



Product Selection Guide

Application Pump Model Pump Kit Pump Combo Controller / Switch
Part #
12 V
Part #
24 V
12 V
Part #
24 V
Part #
12 V
Part #
24 V
Motorbike up to 500cc (Standard) EBP®15 9001       0444 or 0455  
Motorbike 500cc - 1000cc (Std) EBP®23 9050       0444 or 0455  
Motorbike 1000cc - 2000cc (Std) EBP®25 9005       0444 or 0455  
Vehicle Heater System (Standard) EBP®23 9050       0444 or 0455  
LPG (Butane) System (Standard) EBP®23 9050       0444 or 0455  
(depending on capacity)
EBP®23 9050          
EBP®25 9005          
EBP®40 9040 9041     0444 or 0455 0444 or 0455
EWP®80 8005   8907      
Engines up to 2.0L (Standard) EWP®80 8005   8907   8001 8001
Engines up to 2.0L - 3.5L (Standard) EWP®115 8025 or
8026 or
8930 or
8931 or
8001 8001
Engines up to 3.5L - 5.0L (Standard) EWP®130 8080 8081 8990 8991 8001 8001
Engines 5.0L or greater (Standard) EWP®150 8060 8061 8970 8971 8001 8001
Modified Engines
EWP®150 8060 8061 8970 8971 8001 8001
Drag Racing, Drifting & Speedway EWP®150 8060 8061 8970 8971 8001 8001
Off Road / 4WDs EWP®130 8080 8081 8990 8991 8001 8001
Solar Hot Water Systems (depending on size) EBP®15 9001       0444 or 0455  
EBP®23 9050       0444 or 0455  
EBP®25 9005       0444 or 0455  
EBP®40 9040 9041     0444 or 0455 0444 or 0455


 For further information, see Product Information

User Reviews

  • Be the first to review this product.

Please Login to add your review.