The EWP130 Alloy 24V is available for purchase in following options:
Turbocharge your engine cooling with the Davies, Craig EWP®130 alloy Electric Water Pump, your choice of Thermatic® Fan and an LCD EWP®/Fan Digital Controller.
Like all the EWPs, this unit is designed for universal engine fitment, to satisfy those larger and higher horsepower, turbocharged, supercharged and ‘worked’ engines which develop excessive heat.
The EWP®130 alloy unit has AN-16 internal inlet and outlet fittings for neat, tight, screw-in fitting applications. The EWP®130 configuration mirrors the highly successful EWP®80 which offers a numerous selection of attachment options, including elbow and straight adaptors which can be bolted on to both the inlet and outlet for simple remote engine mounting.
The EWP®130 will be supplied with one each of the new 35mm straight and elbow alloy adaptors, ‘O’ rings and mounting hardware along with two 3mm rubber adaptor sleeves. The respective 38 mm alloy adaptors and 6mm rubber adaptor sleeves are optional.
This rugged alloy hi-flow electric water pump is designed to complement or replace the engine’s existing mechanical water pump. This essential performance accessory increases power to your vehicle’s drive wheels and improves coolant temperature control.
The EWP®130 is a universal, do-it-yourself, easy installation fitment to engines up to seven litres. By removing the parasitic power losses of belt-driven water pumps, the EWP®130 releases up to 10kW (13hp) of extra power, increased torque and fuel savings.
Combine it with the LCD EWP®/Fan Digital Controller and the pump continues to run after you’ve switched off, eliminating “heat soak” and extending engine life. The EWP®130 and LCD EWP®/Fan Digital Controller Combo Kit is the most economical way to increase horsepower and save on fuel consumption whilst caring for your engine. The Davies, Craig EWP® header adaptor kit can replace the mechanical water pump completely.
EWP & CONTROLLER INSTALLATION DEMONSTRATION
EWP130 Alloy 24 Volt Pump
|EWP / FAN LCD Controller||1|
|Alloy elbow adaptor - 35mm (1⅜”)||1|
|Alloy straight adaptor - 35mm (1⅜”)||1|
|Rubber adaptor sleeve - 3mm (⅛”)||4|
|EWP Adaptor O-Ring||2|
|Wiring Harness Digital Controller||1|
|Inline Adaptor 5/16"||1|
|EWP130 Combo Hardware Bag||1|
Technical Specifications EWP130
|Voltage||24 Volt Pump|
|Operating voltage||20V DC to 27V DC|
|Maximum current||5.5A @ 24V|
|Flow rate (max)||
141 L/min (37.2 US gal/min) @ 24V DC
|Operating temp.||-40° to 130°C (-40° to 266°F)|
|Pump design||Clockwise centrifugal with volute chamber|
1,226grams (2.7 lb)
Aluminium (Powder Coated)
500 kPa (72.5 psi)
|Seal||Ceramic face seal|
No, none of our pumps are self-priming
|Fits hose sizes||
35mm to 51mm (1⅜” to 2”)
EWP® INSTALLATION OPTIONS
Installing an EWP® as an AUXILIARY PUMP
EWP® INSTALLATION – disabling Mechanical water pump
In both these cases, the EWP® will pump past the impeller of the mechanical water pump.
Disengaged mechanical water pump (recommended)
Removed mechanical water pump (Ideal)
In most cases EWP® will be adequately supported by the radiator hose. Where mounting is required, the EWP® must be soft mounted to protect against vibration. For the EWP115, EWP130 and EWP150 Part #8700 Mounting bracket is recommended.
For optimum control of Davies, Craig 12 Volt and 24 Volt Electric Water Pumps.
Suits EWP®80, EWP®115, EWP®130, EWP®150 and Thermatic® Fans.
The LCD EWP®/Fan Digital Controller has two specific functions. This unique Digital Controller will manage the operation of the EWP® by varying the speed of the pump in response to the coolant temperature and manage control of your electric engine fan. The Controller has a push-button to lock in any one of the nine targeted/set temperatures. It’s highly recommended you set/target the Controller to closely match your engine’s existing thermostat temperature.
Generally, higher engine temperature will offer improved fuel efficiency and lower engine temperature more power. The Digital Controller will operate the engine’s electric fan automatically once the engine has reached 3°C (5.4°F) above the targeted (set) temperature. Another significant benefit is that the Controller allows the EWP® to run on after ignition shutdown to eliminate heat soak.
Technical Specifications LCD Controller
|Voltage Range||12 Volt DC to 29V DC|
|Display LCD Size||
64.6mm (2.54”) x 55.6mm (2.19”)
High & low Temp., Above set temp., Sensor shortcircuit, Pump error, High & low voltage and Sensor open circuit
|Targeted Set Temp Range||Singular degrees from:
40°C (104°F)to 110°C (230°F)
|Memory||Set & targeted temperature|
|Fan Cut-in Temp||3°C (5.4°F) above the targeted (set) temperature|
PCB with micro-processor
Thermister in housing
|Overrun / Shutdown||
10°C (14°F) below set/target temperature or 3
|Indicators||Temperature, power, EWP, test, fan, high & low temp, voltage, above set temperature (with alarm)|
100 grams (3.5 oz)
Length = 98mm (3.8")
- Plus 10°C (14°F) set/target temperature
- Under temp 40°C after 5 mins
- Temp sensor error
- Over or under voltage
- EWP error
Select any set temp range from 40°C (104°F)to 110°C (230°F)
Set / targeted temperature memory
Override feature to assist bleeding EWP & fail safe
Input voltage display
Compatible with billeted style Electric Water Pumps
For further information, see Product Information