The EWP150 Alloy 24V is available for purchase in following options:
Muscle up your engine cooling system with the Davies Craig EWP® 150 alloy Electric Water Pump. Like all EWPs, this advanced unit is designed for remote mounting in the engine bay to satisfy those higher horsepower, turbocharged, supercharged and ‘worked’ engines which develop excessive heat.
The compact EWP®150 alloy unit is manufactured with -AN16 ORB internal inlet and outlet fitting for neat, tight screw-in fitting applications.
This rugged alloy hi-flow electric water pump is designed to complement or replace the engine’s existing mechanical water pump. This essential performance accessory increases power to your vehicle’s drive wheels and improves coolant temperature control.
EWP & CONTROLLER INSTALLATION DEMONSTRATION
|EWP150 Pump 24V||1|
|Voltage||24 Volt Pump|
|Operating voltage||20V DC to 27V DC|
|Maximum current||5.5A @ 24V|
|Flow rate (max)||150 L/min (39.63 US gal/min) @ 24V DC|
|Operating temp.||-40° to 130°C (-40° to 266°F)|
|Pump design||Clockwise centrifugal with volute chamber|
|Pump weight||1,170 grams (2.6 lb)|
|Pump material||Aluminium (Powder Coated)|
|Burst pressure||500 kPa (72.5 psi)|
|Seal||Ceramic face seal|
No, none of our pumps are self-priming
|Fits hose sizes||
35mm to 51mm (1⅜” to 2”)
Inlet & Outlet Fitting: -16AN ORB
|Push-On fitting Size||
EWP Inlet & Outlet 38mm
Combined with an LCD EWP®/Fan Digital Controller (Sold separately Part #8002 or combo #8971) will manage both the EWP® and Thermatic® fan operation. The Digital Controller will vary the speed of the EWP® in response to the engine’s coolant temperature. Multiple temperature settings are provided on the Controller for either maximum power or fuel efficiency. The Thermatic® Fan/s will be activated automatically once the engine coolant rises 3°C (5.4°F) above the targeted (set) temperature. The Digital Controller will automatically run on for three minutes (or to 10°C / 14°F below the set temperature) after engine shut down, eliminating ‘heat soak’ and extending engine life. The EWP®80 Digital Controller Combo is supplied in a do-it-yourself kit with everything you need for fitment to your vehicle’s engine, including an easy-to-follow DIY instruction booklet.
The world’s most advanced total engine cooling management system:
EWP® INSTALLATION OPTIONS
Installing an EWP® as an AUXILIARY PUMP
EWP® INSTALLATION – disabling Mechanical water pump
In both these cases, the EWP® will pump past the impeller of the mechanical water pump.
Disengaged mechanical water pump (recommended)
Removed mechanical water pump (Ideal)
In most cases EWP® will be adequately supported by the radiator hose. Where mounting is required, the EWP® must be soft mounted to protect against vibration. For the EWP115, EWP130 and EWP150 Part #8700 Mounting bracket is recommended.
For further information, see Product Information