The EBP is a ‘brushless’ 12 & 24 volt, high flow, magnetically driven water pump. The EBP motor has no brushes to ever wear out and the pump is magnetically driven by the motor, which means that no shaft sealing is required. There is only one moving part, the impeller, and it is floating in the coolant. The pump chamber is hermetically sealed for trouble free operation. The EBP’s ease of installation, low current draw, high flow capacity and long life makes it ideal for a range of applications.

Davies, Craig’s range of Electric Booster Pumps (EBP) are available in flow rates from 23 L/min (6.1 gal/min) up to 34 L/min (9 gal/min) at 12 & 24volt. Our EBP's are designed for universal fitment to compliment or a vehicle’s existing mechanical belt-driven water pump with simple, DIY installation.

  • Davies, Craig recommends using Glycol 50% in water for all EWP & EBP.
  • Recommended viscosity range for all EWP & EBP: 100 mPa·s @ -30°C to 1 mPa·s @ 100°C

 

EBP APPLICATIONS

  • Booster for car heater and LPG systems
  • Air to Water Intercoolers for Turbo cars
  • Solar pump applications
  • Water cooled motorcycle, Go-Kart engines
  • Turbo Air/Water Intercoolers
  • Household irrigation
  • 4WD Caravan applications

ELECTRIC BOOSTER PUMP SPECIFICATION

 EBP

MODEL 

  
 
EBP23 EBP25 EBP40 EBP40 
12 Volt 12 Volt 12 Volt 24 Volt
 
Operating voltage   6V to 18V DC 8V to 20V DC 6V to 15V DC 12V to 28V DC
Maximum current   1.25 Amps 2.1 Amps 4.6 Amps 2.5 Amps
Motor Type   Magnetic Drive Brushless Magnetic Drive Brushless Magnetic Drive Brushless Magnetic Drive Brushless
Max Flowrate

 

23 l/min

 6.1 gal/min

30 l/min

 7.9 gal/min

35 l/min

 9.2 gal/min

37 l/min

 9.8 gal/min

Rated Flowrate
@10 kPa

 

17.25 l/min

4.6 gal/min

27 l/min

 7.1 gal/min

33 l/min

8.7 gal/min

35.5 l/min

9.4 gal/min

Maximum Head Pressure

 

 0.25 Bar

 3.63 PSI

0.45 Bar

6.53 PSI

0.85 Bar

12.32 PSI

0.85 Bar

12.32 PSI

Maximum Head Height

 

2.5m 

8ft 2.4in

4.5m

14ft 9.2in

8.5m

27ft 10.65in

8.5m

27ft 10.65in

Fluid Temperatures

 

 -40°c to 120°c

 -40°F to 248°F

 -40°c to 120°c

 -40°F to 248°F

 -40°c to 120°c

 -40°F to 248°F

 -40°c to 120°c

 -40°F to 248°F

Pump Weight

 

364 grams

0.8 lbs

650 grams

1.43 lbs

570 grams

1.25 lbs

570 grams

1.25 lbs

Body Material   Polyphenylene sulphide (PPS) & Nylon 66 Polyphenylene sulphide (PPS) Polyphenylene sulphide (PPS) & Nylon 66 Polyphenylene sulphide (PPS) & Nylon 66
Burst Pressure

 

250 kPa

36 Psi

251 kPa

37 Psi

252 kPa

38 Psi

252 kPa

38 Psi

Inlet & Outlet   Push on Barb Push on Barb Push on Barb Push on Barb

Hose Fitment

Standard

 

19mm

3/4"

19mm

3/4" 

19mm

3/4"

19mm

3/4"

 Hose Fitment

with Step Adpater #19020

 

12mm to 16mm

1/2" to 5/8"

12mm to 16mm

1/2" to 5/8"

12mm to 16mm

1/2" to 5/8"

12mm to 16mm

1/2" to 5/8"

Application Motorbike Engine Size

 

up to 500cc

up to 30.5ci 

500cc - 1000cc

30.5 ci - 61ci 

1000cc - 2000cc

61 ci - 122ci 

1000cc - 2000cc

61 ci - 122ci

 

ELECTRIC BOOSTER PUMP SELECTION GUIDE

 APPLICATION

  
 

EBP

MODEL

EBP ONLY EBP KIT 
12 Volt 24 Volt 12 Volt
 
Motorbike up to 500cc (Standard)   EBP®23 9051   9050
Motorbike 500cc - 1000cc (Standard)   EBP®25 9025    
Motorbike 1000cc - 2000cc (Standard)   EBP®40 9040 9041  
Vehicle Heater System (Standard)

 

EBP®23 9051   9050
LPG (Butane) System (Standard)

 

EBP®23 9051   9050

Intercooler

(Depending on capacity)

 

EBP®23 9051   9050

 

EBP®25 9025    

 

EBP®40 9040 9041  

 

Please visit our buy online section to view ELECTRIC BOOSTER PUMP range.