Brushless 10" High Power Thermatic^® Electric Fan (24 VOLT) (PART #0126)

Davies Craig 24 Volt Brushless Thermatic^® Electric Fans offer outstanding performance for their size delivering up to a staggering 55% increase of air flow and 5 times the service life over the standard brushed models!

It is also 26% thinner than its brushed High Power motor equivalent!

Brushless Thermatic^® Fans are suitable for use as:

    Radiator cooling fans

    Air conditioner condenser Fans

    Transmission and engine Oil cooler fans

It provides, constant or variable air flow, increased fuel economy, improved air conditioning performance, cooler engine temperatures, low profile, high performance, increased engine power.

The IP68 rated motor with built in reversible motor rotation technology allows for either upstream (pusher) or downstream (puller) applications.

The flexibility of nine (9) different smart motor control modes; Full speed running, analogue speed control or pulse width modulation (PWM) speed control allowing for optimal control in any application.

These fan assemblies are set up for upstream / pusher applications from the factory.

For downstream applications, the fan blade must be removed and turned over and the wiring adjusted as per the instructions. Always check that the fan blade rotates in the direction shown by the arrows on the blade before making a permanent wiring connection and prior to fastening the unit to the radiator.

UNIVERSAL FAN FITTING KIT

(sold separately)

The Davies, Craig Universal Fan Fitting Kit includes all parts necessary for mounting and wiring any 12- and 24-volt electric fans
– all Davies, Craig Thermatic^® Fans and other electric fan models.

• Parts #1000, #1001, #1002 or #1003

If you just require the mounting hardware (no wiring):

• Quick Fit Kit Part #0579 or Mounting Hardware Part #0578

BRUSHLESS THERMATIC^® FAN MOTOR CONTROL INTERFACE

The Brushless Thermatic^® fan has 9 different control modes for flexible and smart motor control. For optimal control, Davies, Craig recommends the use of a Thermatic^® Fan Switch.

Davies, Craig has a full range of Thermatic^® Fan Switches are available in both mechanical (#0401, #0404 & #0400) and Digital Thermatic^® Fan Switches (#0444, #0445, #0448, #0435, #0438 & #0500). (Sold separately)

https://daviescraig.com.au/category/switches-fan-controllers-ewp 

THERMATIC^® / ELECTRIC FAN RANGE

What size Thermatic^® Fan do I need?

Davies Craig has made this process extremely easy –

A). Jump onto our website, https://daviescraig.com.au/fan-fitments 

B). Click onto “Fan Selection Guide” in the grey banner on the top of home page. C). Place your vehicle make and model in the spaces provided or measure your radiator core dimensions (width, height and depth, (being the distance from the front of the engine to back of the radiator core).

The “Fan Selection Guide” will simply give you the appropriate fan options for your radiator to make a safe and correct choice.

If your car make is not listed in our Fan Selection Guide or the Model Selection Guide (see the Davies, Craig website, www.daviescraig.com.au/catalogues) we suggest the following:

1. Measure your radiator core dimensions (width, depth and clearance - refer diagram below) and refer to “Fan Models” to check which fan/s will fit your core.
2. Davies Craig Thermatic^® Fans are reversible (Ex: Brushless models) which means they can be mounted upstream or downstream, as illustrated below.
3. In general, one large fan will have better airflow than two smaller fans. Where radiator is rectangular there may be no choice but to fit two smaller fans; choose the largest that can be accommodated in space available. The fan can also be mounted offset from centre to clear engine components when mounted in the downstream position.
   Note: Fans should not be fitted on opposite sides of radiator core unless these are offset such that the airflow of one is not interfering with the airflow of the other.
4. If you require advice, please contact Davies, Craig for assistance.

Fan Mounting Direction