The Tyreguard 400 Transmitter Booster / Repeater is designed to assist transmit the signals from the sensors to the monitor should the vehicle that the TPMS is fitted to exceeds 8.0 meters. While the system has been tested and will function up to 18 meters (60 ft), there may be occasions where a vehicle will emit electronic interference causing the loss of signal from the sensors. The chance of losing signals increases with distance (monitor to rear tyre), extreme cold and battery deterioration.
|
KIT CONTENTS |
|
|
DESCRIPTION |
UNITS |
|
Booster |
1 |
|
Mounting Ties |
4 |
|
Instructions |
1 |
SPECIFICATIONS
The booster requires external DC power: DC 12V or DC 24V. Red wire is “+” positive, white wire is “-“ negative. If uncertain, contact a local repair facility to help install the unit.
Working Temperature -40~85℃ (-40°F to 185°F)
Working Voltage DC 12V~DC 24V
Working Frequency 433.92 MHZ
When running the booster directly off a battery (car or caravan), we recommend having a switch so that it does not drain the battery when not in use. This will prevent unnecessary wear on the battery system.
The alternative is to set up a solar system for the battery.
Positioning the Booster
